Brivo - Firmware Upgrade Preparation 2018/10/22

Brivo control panels should always operate using the latest firmware. However, we have determined that some
ACS6000 panels may perform poorly at 1 Gigabit per second speeds (1Gbps) for the Ethernet connection between
the panel and the Brivo server. This may cause the board connection to be unstable on certain networks. Most
problems can be resolved by setting the link speed to 100 Megabit per second Half Duplex (100Mbps HD) mode via
the webCLI interface. The instructions below detail how to accomplish setting this link speed.